An annual output of 150,000 cubic meters aerated block equipment is a large aerated concrete production equipment, which can produce an annual output of 150,000 cubic meters aerated block, its advanced production technology, adopt automated production operations, greatly improved product quality and yield. An annual output of 150,000 cubic meters aerated concrete production process equipment: first storage materials by measuring ingredients after pouring into the mixer, stir after pouring in a mold (plate reinforcement), pre certain temperature and time dependent, blanks After the body reaches a certain hardness, the mold and the flip spreader body hanging onto the cutter, flip spreader perform the following functions: A mold in the air as the 90-degree flip; (mold body side panels to be supported by the bottom of the air Flip the cutting board until the steam curing process of the finished product), B winched to the car or cutting the support frame is completely open mode, C mode off steam curing box and return to the side, and then reassembled into a mold, waiting to clean up after injection) Re-casting, body step in the cutting machine for cutting six sides: A First performed blank sides of the vertical cut, B and longitudinal horizontal cut; C final lateral or horizontal cutting knife, cut a good body of semi-finished products spreader hanging to the floor along with steam curing car, and then grouped into high temperature steam curing autoclave steam curing, steam curing After the kettle from the finished stacking the finished hanging spreader or loading, packing, steam curing side is returned.